Rock Mechanics
126
The Influence of Asperities, Joint Topology and Stress on Fracture Geomechanical Properties
T.R. Packulak, M.T. Ahmed Labeid, D.A. Bonneau, Mark S. Diederichs, D. Jean Hutchinson, J.J. Day
131
Determining the most representative parameter for quantifying the rock block size used for evaluating the hydraulic erodibility of rock
Lamine Boumaiza, Ali Saeidi, Marco Quirion
166
The impact of a salt deposit’s origin on its exploitation: three case-studies from underground mining operations
Jonathan D. Aubertin, Stefan Hoentzsch, Mark S. Diederichs, D. Jean Hutchinson
187
196
Rock slope stability and snow disposal capacity optimization, St-Michel Quarry, City of Montréal
André J. Rancourt, Ghislain Dionne, Pierre Marcoux, Benjamin Pugi, Alberto Cardenas
221
The axial response of fully grouted rock bolts using a distributed fiber optic sensor technique
Tyler O’Connor, Bradley Forbes, Nicholas Vlachopoulos, Mark S. Diederichs
235
Ageing of cement grouted joint by water and acidic flows for assessing dam foundation quality
Nicolas Néron, Patrice Rivard
288
291
Statistical Analysis of the Q-system in Different Tunnelling Conditions
R.A. Ziebarth, A.G. Corkum
311
387
Impact of sample selection on unconfined compressive laboratory test results in hydrothermally veined rocks
Matthew D. Clark, Jennifer J. Day
428
Hazard identification, stability assessment and risk mitigation overview of near-surface openings and pillars at the former Mine Principale, in Chibougamau, Quebec
Eliane Cabot, Adam Coulson, James Tod, Scott McNicoll, Simon Delattre, Henrik Rasmussen, Carl Gauthier
437
Investigation of Drilling Performance in Core Bit Drilling using passive-Vibration Assisted Rotary Drilling (p-VARD) Technology
Md. Shaheen Shah, Yingjian Xiao, Stephen Butt
530
Empirical Procedure Investigation for Sandstone Anisotropy Evaluation: Part I
Abdelsalam Abugharara, Stephen Butt, John Molgaard, Charles Hurich
531
Empirical Procedure Investigation for Sandstone Anisotropy Evaluation: Part II
Abdelsalam Abugharara, Stephen Butt, John Molgaard, Charles Hurich
541
Investigation of Hole Widening Drilling Using Cutting Analysis
Daiyan Ahmed, Yingjian Xiao, Jeronimo de Moura Jr., Stephen Butt
548
Accounting for intrablock structures at rockmass and laboratory specimen scales
Jennifer J. Day, Matthew D. Clark
568
Development and testing of the CMIN-BCM for monitoring borehole closure in underground environments
Steven Gaines, Ken Judge, Denis Labrie
