Abdel-Baset, M.
Equations to Correct SPT-N Values Obtained from Using Non-Standard Hammer Weight – Part II

Abdelrahman, G.E.
Conventional method to estimate settlement of plate subjected to bi-axial loading – Part I

Equations to Correct SPT-N Values Obtained from Using Non-Standard Hammer Weight – Part II

Abedin, Md. Zoynul
Prediction of Compressibility Characteristics of In-situ Cohesive Soil using Reconstituted Sample

Abi-Nahed, Charbel
Laboratory Method for Determining Thermal Resistivity of a Coarse Aggregate Mixture

Abouzied, M.
Conventional method to estimate settlement of plate subjected to bi-axial loading – Part I

Abugharara, Abdelsalam
Empirical Procedure Investigation for Sandstone Anisotropy Evaluation: Part I

Empirical Procedure Investigation for Sandstone Anisotropy Evaluation: Part II

Ackley, Caren
Laboratory Method for Determining Thermal Resistivity of a Coarse Aggregate Mixture

Adajar, Joash Bryan
Use of Particulate Mechanics Concept in Characterizing Soil and Crop Residue Interaction in Tillage

Adamson, Devon
Construction and Post-Construction Deformations of an MSE Wall using Terrestrial Laser Scanning

Addai, M.K.
Optimization of sewage lagoon systems operations: An investigation into the removal of metals from wastewater

Addi, Nor el-hoda
Assessment of the influence of aqueous solutions chemistry on the water absorbency of recycled superabsorbent polymers

Évaluation du potentiel de séquestration des métaux lourds contenus dans des pulpes de résidus miniers par les polymères superabsorbants (PSA)

Optimization of superabsorbent polymers (SAPs) dosage for dewatering mine tailings slurry

Ahmad, Ken
Remediation of Slope Failure in the Application of Lightweight Fill and Timber Piles on Highway 17 in Ontario

Update on Rock Fill Settlement in a Highway Embankment in Northern Ontario: A Case Study

Ahmad, Saeed
Correlations between Low and High Strain Stiffnesses of few Natural and Artificial Cohesive Soils

Ahmed, Aly
Correlations between Low and High Strain Stiffnesses of few Natural and Artificial Cohesive Soils

Ahmed, Daiyan
Investigation of Hole Widening Drilling Using Cutting Analysis

Ahmed Labeid, M.T.
The Influence of Asperities, Joint Topology and Stress on Fracture Geomechanical Properties

Ainsley, Keith
Assessment of rapid drawdown of a cofferdam and main dam using a coupled transient seepage-stability model that considers the reservoir level increase, steady-state level duration, and drawdown using actual hydrographic data for a given river

Akpan, Etido Gideon
Analytical assessment of the drilling risers stability in the Newfoundland deep offshore

Analytical Modeling of Well-Conductor Seabed Interaction in Complex Layered Soil in Newfoundland Offshore

Al Tarhouni, Mahmud
Dynamic behaviour of dry sand in simple shear loading at a wide range of normal stresses

Al-Mamun, Mohammad
Post VSD aided test column characterization of consolidation properties of oil sands tailings

Alainachi, Imad
Shaking table testing of liquefaction potential of cemented paste backfill: Effects of backfill temperature

Alam, Md. Kausar
Prediction of Compressibility Characteristics of In-situ Cohesive Soil using Reconstituted Sample

Aldaeef, A.A.
Influence of pipeline transport on sedimentation and consolidation of flocculated Fluid Fine Tailings (fFFT)

Alfaro, Marolo
Comparison of sedimentary environment and geotechnical properties of Lake Agassiz and Ariake clays for application of Deep Mixing Method

Construction and Post-Construction Deformations of an MSE Wall using Terrestrial Laser Scanning

Modelling embankment temperatures in Arctic highways using thermal modifiers and surface energy balance boundary conditions

Numerical investigation of concrete energy pile behavior in Winnipeg using coupled thermo-hydro-mechanical finite element analyses

Numerical modelling of a clay core earth fill dam with and without creep deformation

Preliminary deformation detection of high-fill sections along the Inuvik-Tuktoyaktuk Highway using UAV photogrammetry

Use of Particulate Mechanics Concept in Characterizing Soil and Crop Residue Interaction in Tillage

Ali, Hassan
Evaluation of liquefaction potential for a dam using combination of traditional and performance based seismic design methods

Ali, Malika
Highway 27:10 – Replacement of Red Deer River Bridge East of Morrin, Alberta: Abutment Stability Pile Wall

Allen, William
An analytical parametric study of uplifting resistance in buried pipelines

Almallah, Ahmed
1g model tests of vertically loaded GFRP piles

Alston, Colin
Stabilization of Rail Track Bed Mile 9.0 – 9.1, CN, Dundas Subdivision

Amini, Dana
Ground nonlinear dynamic response by considering multi-dimensional seismic site effects

An, Rosa
State Parameter Estimation by CPTu Interpretation for Liquefaction Susceptibility – A Comparison of Methods

Anbazhagan, P.
Dynamic properties of silty-sand varying saturation in a cyclic triaxial test

Andrejack Loux, Theresa
Foamed Glass Aggregate Lightweight Fill Over Compressible Soils

Anglade, Julien
The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Anongphouth, Alitking
Numerical investigation of concrete energy pile behavior in Winnipeg using coupled thermo-hydro-mechanical finite element analyses

Arenson, Lukas U.
Modelling embankment temperatures in Arctic highways using thermal modifiers and surface energy balance boundary conditions

Preliminary deformation detection of high-fill sections along the Inuvik-Tuktoyaktuk Highway using UAV photogrammetry

Armstrong, J.J-L.
Characterization and Environmental Risk Assessment Associated with a Sewage Lagoon Managed by the Canadian Armed Force

Arpin, Bruno Pierre
Controlling Risk to Critical Infrastructure during Construction: Seine Riverbank Stabilization at the Branch 1 Aqueduct, Winnipeg, Manitoba

Arsenault, J.L.
Hydro-TISAR and Hydro-SEEp – Innovative geophysical techniques for geotechnical and hydrogeological investigations

Artman, Steve
Case study: Design-build of a cement-bentonite groundwater cutoff wall in Fort-McMurray

Aubertin, Jonathan D.
Application of LiDAR technology for the assessment of mechanical scaling conditions in underground mines and tunnels

The impact of a salt deposit’s origin on its exploitation: three case-studies from underground mining operations

Aubertin, Michel
An assessment of hydrogeological properties of waste rock using infiltration tests and numerical simulations

Influence of pore water pressures on the stress state in inclined backfilled stopes

On the seismic response of tailings dikes constructed with the upstream and center-line methods

Physical modelling of tailings consolidation near a waste rock inclusion

Auvray, C.
Use of a reduced scale physical model of a mine stope for assessing waste rock barricades potential instabilities due to early age pastefill pressure

Baba, Hafeez
Designing of Deep Foundation Systems for Offshore and Onshore Facilities – Similarities and Dissimilarities

Top

Babaee, Yassaman
Effect of Temperature on Cadmium Sorption in Sand and Clay

Bagheri, Farsheed
Assessment of the Effects of Climate Change on Slope Stability Using Local Factor of Safety

Balachandran, Kanagaratnam
Statistical Correlations between effective angle of internal friction (?’) and SPT- N value for cohesive glacial tills

Ballard, Jean-Marc
Improving ground heat exchangers for geothermal heat pump systems with a groundwater-filled borehole and a thermally enhanced double U-pipe

Balogh, Susan
William R. Bennett bridge – Ten years of performance monitoring

Bancroft, Mark
Analyses of climatic data to determine the frost penetration depth based on statistical analyses and matching to measured ground temperature profiles

Baninajarian, Leila
Effect of climate change on soil embankment stability

Baraër, Michel
Runoff and infiltration estimates based on pore pressure changes in shallow aquitards

Barlow, Pete
The estimated economic impacts of prairie landslides in western Canada

Barrett, Jeffrey
Settlement Analysis on Glacio-Lacustrine Clays using Observational Method for a New Interchange in Winnipeg, Manitoba

Barrett, John
Formulation of 3D Soil Springs for Pipe Stress Analyses

Barriga-Gallarday, Hector
Geotechnical characterization of igneous saprolite using the Seismic Cone Penetration Test (SCPTu) from a jungle site in South America

Bartsch, Cam
3D Geological Modelling as a Tool for Evaluating Foundations – A Case Study for Lower Baker Dam, Washington State, USA

Bartz, James R.
A modern approach to the design of driven precastprestressed concrete piles in Winnipeg

Bashir, Rashid
Assessment of the Effects of Climate Change on Slope Stability Using Local Factor of Safety

Effect of climate change on soil embankment stability

Batenipour, Hamid
Correlation between the PDA-Derived Pile Side Resistance and Undrained Shear Strength of Clays in Alberta

Bathurst, Richard J.
A simple approach for probabilistic internal stability analysis and design of reinforced soil walls

Bayoumi, Aya
Toward the post-seismic settlement assessment in the laboratory

Beck, Alistair
Large Scale Flood, Steep Creek, and Landslide-Dam Flood Risk Prioritization in British Columbia, Canada

Beck, Deborah
Evaluation of the costs and benefits of natural and grey infrastructures for the protection of the Lake Erie shoreline

Becker, Dennis E.
Geotechnical Characterization of a Glacio-Lacustrine Clay Deposit of the Abitibi Region – Case Study

Interpretation and analysis of a test embankment on soft clay

Beier, Nicholas A.
Closure and the Long-term Behaviour of Tailings Dams: Using Industry Experience to Fill in the Gaps

Development of a waste rock simulation model to mitigate environmental impacts of acid rock drainage

The effect of flyash addition on the consolidation properties and shear strength of oil sands fluid fine tailings

Beitel, Brent
Large Scale Flood, Steep Creek, and Landslide-Dam Flood Risk Prioritization in British Columbia, Canada

Belbas, Ryan
Capacity of driven precast prestressed concrete hexagonal piles: a Winnipeg region geotechnical study

Belem, Tikou
Assessment of the influence of aqueous solutions chemistry on the water absorbency of recycled superabsorbent polymers

Évaluation du potentiel de séquestration des métaux lourds contenus dans des pulpes de résidus miniers par les polymères superabsorbants (PSA)

Lime stabilization of soil-sludge mixtures for a potential use in oxygen barrier for mine site rehabilitation

Optimization of superabsorbent polymers (SAPs) dosage for dewatering mine tailings slurry

Use of a reduced scale physical model of a mine stope for assessing waste rock barricades potential instabilities due to early age pastefill pressure

Berg, Rick
Assessment of rapid drawdown of a cofferdam and main dam using a coupled transient seepage-stability model that considers the reservoir level increase, steady-state level duration, and drawdown using actual hydrographic data for a given river

Berru-García, Ingrid
Geotechnical characterization of igneous saprolite using the Seismic Cone Penetration Test (SCPTu) from a jungle site in South America

Bessette, Caroline
Evaluation of existing constitutive models in nonlinear 1D effective stress ground response analysis

Bhuiyan, Imteaz
Preliminary Design For Seepage Remediation at a Small, Remote Dam – Case Study of Lac La Ronge Dam in Northern Saskatchewan

Blais-Stevens, Andrée
Historical landslides in Canada resulting in fatalities (1771-2018)

Blatz, James A.
A modern approach to the design of driven precastprestressed concrete piles in Winnipeg

A study on the effects of slope grade on the soil-pipeline interaction loading

Capacity of driven precast prestressed concrete hexagonal piles: a Winnipeg region geotechnical study

Construction and Post-Construction Deformations of an MSE Wall using Terrestrial Laser Scanning

Bobrowsky, Peter
The estimated economic impacts of prairie landslides in western Canada

Bocking, K.
Interpretation and analysis of a test embankment on soft clay

Bom, A.
Update on Rock Fill Settlement in a Highway Embankment in Northern Ontario: A Case Study

Bonneau, D.A.
The Influence of Asperities, Joint Topology and Stress on Fracture Geomechanical Properties

Boone, S.J.
Measurements of ground-borne vibrations at two operational wind turbine facilities

Boonsinsuk, Prapote
Use of routine geotechnical investigation reports

Botula, Yves-Dady
Saturated-unsaturated numerical modelling of a vertically heterogeneous monolayer cover with an elevated water table: the Manitou site case study

Boumaiza, Lamine
Combining shallow hydrogeological characterization with borehole data for determining hydrofacies in the Valin River paleodelta

Determining the most representative parameter for quantifying the rock block size used for evaluating the hydraulic erodibility of rock

Reviewing the potential anthropogenic sources of groundwater contamination – Case study of the expanding urban area of Taleza in Algeria

Bozorgzadeh, Nezam
A simple approach for probabilistic internal stability analysis and design of reinforced soil walls

Braverman, Michael
Laboratory Method for Determining Thermal Resistivity of a Coarse Aggregate Mixture

Brennan, Gregory
Near-Field Thermo-Mechanical Coupled Processes in Host Rocks of High-Level Waste Deep Geological Repositories

Broadhead, Kris
Use of an Innovative Technology for Measuring Surface Roughness of Pavement

Brown, J.
Full Scale Foundation Testing of Rammed Aggregate Pier® Supported Foundations in the Toronto Waterfront

Browne, Thomas
Making Ice Stronger: From the Design of an Aircraft Carrier in WWII to Applications in a Changing Climate

Buchanan, Matthew
Large Scale Flood, Steep Creek, and Landslide-Dam Flood Risk Prioritization in British Columbia, Canada

Buchanan, P.
Interpretation and analysis of a test embankment on soft clay

Buechi, Andi
Alternative to Soldier Pile Walls – Using Anchored HighTensile Steel Mesh for Temporary Excavation Support in an Urban Environment

Bunce, Chris
The estimated economic impacts of prairie landslides in western Canada

Bussière, Bruno
Hydrogeological properties of geosynthetic clay liners (GCL) permeated with synthetic acid mine drainage

Saturated-unsaturated numerical modelling of a vertically heterogeneous monolayer cover with an elevated water table: the Manitou site case study

Butt, Stephen
Determination of the formation properties from Rotary Percussion Drilling data

Empirical Procedure Investigation for Sandstone Anisotropy Evaluation: Part I

Empirical Procedure Investigation for Sandstone Anisotropy Evaluation: Part II

Geomechanics Study of Ore and Host Rocks for Narrow Vein Mining

Investigation of Drilling Performance in Core Bit Drilling using passive-Vibration Assisted Rotary Drilling (p-VARD) Technology

Investigation of Hole Widening Drilling Using Cutting Analysis

Subsurface rock interface imaging with the application of Ground Penetrating Radar (GPR)

Cabot, Eliane
Hazard identification, stability assessment and risk mitigation overview of near-surface openings and pillars at the former Mine Principale, in Chibougamau, Quebec

Top

Cami, Brigid
A more accurate way to measure spatial correlation length from CPT data – ARMA models

General probabilistic analysis of simple reinforced slopes using RLEM approach

Campos Halas, D.
Hydro-TISAR and Hydro-SEEp – Innovative geophysical techniques for geotechnical and hydrogeological investigations

Cao, Laifa
A deviatoric softening law for predicting the deformation of soft clays subject to anisotropic consolidation

Statistical Correlations between effective angle of internal friction (?’) and SPT- N value for cohesive glacial tills

Use of micropiles in Southern Ontario

Cardenas, Alberto
Rock slope stability and snow disposal capacity optimization, St-Michel Quarry, City of Montréal

Castonguay, Vincent
Modifying the NorSand soil model to improve static simple shear behaviour predictions

Catalano, Bernard
Innovative Tunneling in the Norris Cut Channel

Cavanagh, Paul
Soil Profiling of Pleistocene Deposits in the Athabasca Oil Sands using SCPTu

Chabour, Nabil
Reviewing the potential anthropogenic sources of groundwater contamination – Case study of the expanding urban area of Taleza in Algeria

Challouf, Walid
The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Chan, Nicole
An analytical parametric study of lateral pipeline-soil interaction in partially embedded pipelines

Charlebois, Lawrence
Making Ice Stronger: From the Design of an Aircraft Carrier in WWII to Applications in a Changing Climate

Chekired, Mohamed
3D Simulation of Packing of Heterogeneous Ellipsoidal Particles using Discrete Element Method

A laboratory-based study correlating the large-strain static constrained modulus to the small-strain shear modulus for clean sands

Chen, Jin
Modeling of seepage using a Eulerian-based finite element method

Chen, Ying
Use of Particulate Mechanics Concept in Characterizing Soil and Crop Residue Interaction in Tillage

Chenari, Reza Jamshidi
General probabilistic analysis of simple reinforced slopes using RLEM approach

Cheve, N.
Hydrogeological properties of geosynthetic clay liners (GCL) permeated with synthetic acid mine drainage

Choi, Abe
Use of Lightweight Fill Materials for MSE Wall

Choueiri, Zana Fares
Alternative to Soldier Pile Walls – Using Anchored HighTensile Steel Mesh for Temporary Excavation Support in an Urban Environment

Chowdhury, Farhana
Effect of Temperature on Cadmium Sorption in Sand and Clay

Christensen, C.
Extraction of depth to bedrock from airborne electromagnetic data using artificial neural networks

Clark, Matthew D.
Accounting for intrablock structures at rockmass and laboratory specimen scales

Impact of sample selection on unconfined compressive laboratory test results in hydrothermally veined rocks

Clelland, Lawrence
Influence of Fines Content on Cyclic Resistance through the Critical State Framework

Coish, Heidi
An analytical parametric study of lateral pipeline-soil interaction in partially embedded pipelines

Comeau, Félix-Antoine
Low temperature geothermal resources in the Canadian Shield: The feasibility of using water from flooded mines as an energy source in Northern Quebec

Corkum, A.G.
Statistical Analysis of the Q-system in Different Tunnelling Conditions

Coughenour, Nathan
Case study: Design-build of a cement-bentonite groundwater cutoff wall in Fort-McMurray

Case Study: Installation of a Soil-Cement-Bentonite Groundwater Cutoff Wall in Argentia, NL

Coulson, Adam
Hazard identification, stability assessment and risk mitigation overview of near-surface openings and pillars at the former Mine Principale, in Chibougamau, Quebec

Coulter, Stephen
Highway 27:10 – Replacement of Red Deer River Bridge East of Morrin, Alberta: Abutment Stability Pile Wall

Cousineau, Pierre A.
Combining shallow hydrogeological characterization with borehole data for determining hydrofacies in the Valin River paleodelta

Creer, Geoffrey
A comparison between free-field shear strain profiles using natural and synthetic earthquake motions in a case study

Full Scale Foundation Testing of Rammed Aggregate Pier® Supported Foundations in the Toronto Waterfront

Cruz, Ivan River
Post-seismic settlement mitigation for a building in Richmond, B.C.

DaSilva, F.
Interpretation and analysis of a test embankment on soft clay

Top

Dastpak, Pouya
General probabilistic analysis of simple reinforced slopes using RLEM approach

Day, Jennifer J.
Accounting for intrablock structures at rockmass and laboratory specimen scales

Impact of sample selection on unconfined compressive laboratory test results in hydrothermally veined rocks

The Influence of Asperities, Joint Topology and Stress on Fracture Geomechanical Properties

Dayarathne, R.S.
An approach for finite element modeling of one-dimensional thaw consolidation

De Guzman, Earl Marvin B.
Modelling embankment temperatures in Arctic highways using thermal modifiers and surface energy balance boundary conditions

Preliminary deformation detection of high-fill sections along the Inuvik-Tuktoyaktuk Highway using UAV photogrammetry

de Moura Jr., Jeronimo
Investigation of Hole Widening Drilling Using Cutting Analysis

De Souza, A.K.
Update on Rock Fill Settlement in a Highway Embankment in Northern Ontario: A Case Study

Dean, Matthew
A geosynthetic reinforced earth retaining structure to eliminate lateral earth pressure on concrete grade beam walls – a case study

Deane, Evan
The use and limitations of modern technologies for slow, vegetated landslide monitoring – Chin Coulee Landslide

Debnath, Suborno
Assessment of Stress Intensity Factor for buried cast iron pipeline using finite element analysis

Delattre, Simon
Hazard identification, stability assessment and risk mitigation overview of near-surface openings and pillars at the former Mine Principale, in Chibougamau, Quebec

Delisle, Marie-Christine
A useful tool to evaluate the seismic stability of clayey slopes: the spectral pseudo-static approach

Prioritization of Slope Stabilization Work on Québec's Road Network

Demers, Denis
Influence of surficial crusts on the development of spreads and flows in Eastern Canadian sensitive clays

Numerical modelling of downward progressive failure in sensitive clays: the case of the 1976 landslide at Saint-Fabien, Québec

Demers Bonin, Michaël
Geotechnical Characterization of a Glacio-Lacustrine Clay Deposit of the Abitibi Region – Case Study

Deng, Lijun
Field Axial Testing of Screw Micropiles in Sand and SPT-based Estimation Method

Image Analysis Method for Estimating Porosity Distribution of Soilcrete

DeSira, Andrew
Effect of climate change on soil embankment stability

Devonald, D.M.
Consolidation Behaviour of Colluvium Derived from Overconsolidated Glaciolacustrine Deposits Under Highway Embankment Fills

Dewar, Doug
A Suggested Soil And/Or Rock To Pipeline Landslide Interaction Classification System

Dey, Rajib
A coupled numerical approach for assessing the bearing capacity of an eccentrically loaded foundation on layered cohesionless soil near a slope

Prediction of Compressibility Characteristics of In-situ Cohesive Soil using Reconstituted Sample

Dhar, Ashutosh
Assessment of Stress Intensity Factor for buried cast iron pipeline using finite element analysis

Dynamic behaviour of dry sand in simple shear loading at a wide range of normal stresses

Pulling rate effects on the pullout force of buried small diameter MDPE pipe in loose sand

Shear strength assessment of a well-graded clean sand

Some aspects of offshore pipeline design against upheaval buckling

Diab, R.
Calibration of P-Y Curves Using Lateral Load Test Results in Cohesive and Cohesionless Soils for Large Diameter Drilled Shaft

Load testing of large diameter single drilled shaft foundations for the REM project in Montreal

Diane, Lansana
Lime stabilization of soil-sludge mixtures for a potential use in oxygen barrier for mine site rehabilitation

Diederichs, Mark S.
Application of LiDAR technology for the assessment of mechanical scaling conditions in underground mines and tunnels

The axial response of fully grouted rock bolts using a distributed fiber optic sensor technique

The impact of a salt deposit’s origin on its exploitation: three case-studies from underground mining operations

The Influence of Asperities, Joint Topology and Stress on Fracture Geomechanical Properties

When the Layer-Cake Bites Back: Tunnelling Challenges in Sedimentary Rock

Dion, Guillaume
The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Dionne, Ghislain
Rock slope stability and snow disposal capacity optimization, St-Michel Quarry, City of Montréal

Dipple, Matthew
Landslide Susceptibility Mapping for Large Landslides in Saskatchewan

Dittrich, J.P.
Update on Rock Fill Settlement in a Highway Embankment in Northern Ontario: A Case Study

Dolton, Brad
Reconstruction of a roadway over an active landslide using lightweight cellular concrete

Dong, Xiaoyu
Analytical assessment of the drilling risers stability in the Newfoundland deep offshore

Analytical Modeling of Well-Conductor Seabed Interaction in Complex Layered Soil in Newfoundland Offshore

The Influence of Slug Characteristics on Oscillation of Steel Catenary Risers in the Non-Linear Hysteretic Seabed

Doré, Guy
Modelling embankment temperatures in Arctic highways using thermal modifiers and surface energy balance boundary conditions

Preliminary deformation detection of high-fill sections along the Inuvik-Tuktoyaktuk Highway using UAV photogrammetry

Dowling, Casey
Landslide Susceptibility Mapping for Large Landslides in Saskatchewan

Drevininkas, A.
Full Scale Foundation Testing of Rammed Aggregate Pier® Supported Foundations in the Toronto Waterfront

Drias, Tarek
Reviewing the potential anthropogenic sources of groundwater contamination – Case study of the expanding urban area of Taleza in Algeria

Dugie, Matt
State Parameter Estimation by CPTu Interpretation for Liquefaction Susceptibility – A Comparison of Methods

Duhaime, François
Runoff and infiltration estimates based on pore pressure changes in shallow aquitards

Dunstan, Shane
Geotechnical, Geophysical and Hydrogeological Characterization of Soft Sensitive Leda Clay in Ottawa and Associated Challenges in Foundation Seismic Design

Duval, Shane
Reconstruction of a roadway over an active landslide using lightweight cellular concrete

D’Amours, L.
Calibration of P-Y Curves Using Lateral Load Test Results in Cohesive and Cohesionless Soils for Large Diameter Drilled Shaft

Load testing of large diameter single drilled shaft foundations for the REM project in Montreal

El Mahboub, Khadija
Assessment of the influence of aqueous solutions chemistry on the water absorbency of recycled superabsorbent polymers

Top

Évaluation du potentiel de séquestration des métaux lourds contenus dans des pulpes de résidus miniers par les polymères superabsorbants (PSA)

Optimization of superabsorbent polymers (SAPs) dosage for dewatering mine tailings slurry

El Naggar, Hany
1g model tests of vertically loaded GFRP piles

Comparison of the Shear Strength Parameters of TDA

Dynamic Properties of Tire-Derived Aggregates

Numerical Modeling of High Embankment Built on Soft Soil

El Naggar, M. Hesham
Correlations between Low and High Strain Stiffnesses of few Natural and Artificial Cohesive Soils

Elbanna, Mahmoud
Soil Profiling of Pleistocene Deposits in the Athabasca Oil Sands using SCPTu

Elbeggo, Dania
The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Elwood, D.
Additional Tools for the Study of Variable Water Content Effects on a Slow-Moving Landslide

Esposito, Gennaro
Induced Seismicity in Fox Creek, AB: Amplification Function and Foundation Factors

Etezad, M.
Interpretation and analysis of a test embankment on soft clay

Éthier, Yannic
The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Top

Evensen, H.
Consolidation Behaviour of Colluvium Derived from Overconsolidated Glaciolacustrine Deposits Under Highway Embankment Fills

Top

Fall, Mamadou
Shaking table testing of liquefaction potential of cemented paste backfill: Effects of backfill temperature

Top

Temperature dependence of interface shear behavior of cemented paste backfill-rock

Fang, Kun
Temperature dependence of interface shear behavior of cemented paste backfill-rock

Fannin, Jonathan
Internal Erosion of Zoned Earthfill Dams and Their Foundations: Commentary on the State-of-Practice

Fathalkhani, Marziyeh
The application of horizontal geothermal systems in Gillam (Manitoba): a case study

Fatolahzadeh, Ali
Performance of ground-source heat pump systems in cold regions: a case study

Fenton, Gordon A.
Considerations for Resistance Factor Calibration in the National Building Code of Canada

Fernández, Federico
Energy-Based Design of Sustainable Earthworks Compaction

Physical Models for Experiential Learning in Geotechnical Engineering

Field, David A.
Calgary Cancer Centre – Design and Construction Challenges for a Deep Excavation and Building Foundations within Lacustrine Clay

Filshill, Archie
Foamed Glass Aggregate Lightweight Fill Over Compressible Soils

Fityus, Stephen
Suction effects on the compressibility and creep of crushable sands

Fitzgerald, Al
Using a limit states approach for ice road design

Fleming, Ian
A Low-Cost Automated SWCC Device and Data Analysis Procedure For Unsaturated Soils Exhibiting Volume Change

Evaluating the feasibility of using guanidinium salts as a means of in-situ soil strengthening

Flynn, David
Controlling Risk to Critical Infrastructure during Construction: Seine Riverbank Stabilization at the Branch 1 Aqueduct, Winnipeg, Manitoba

Foote, Jonathan
Challenges in Assessing a Hydraulic Fill Dam Built in the 1920s for Liquefaction and Piping Potential

Forbes, Bradley
The axial response of fully grouted rock bolts using a distributed fiber optic sensor technique

Fouzder, Anup
Dynamic behaviour of dry sand in simple shear loading at a wide range of normal stresses

Franklin, Oliha
Construction of a Multi-Use Pathway on Soft Compressible Deposits– Case Study

Frederking, Robert
Making Ice Stronger: From the Design of an Aircraft Carrier in WWII to Applications in a Changing Climate

Froese, Corey
The estimated economic impacts of prairie landslides in western Canada

Froese, Ken
Landslide Stabilization Using Wick Drain Dewatering of Artesian Groundwater Pressures – Highway 40:30 North of Hinton, Alberta

Frydman, S.
Pathology of a research error: Coefficient of earth pressure at-rest for cohesionless soils

Fuerth, David
Use of Lightweight Fill Materials for MSE Wall

Gaines, Steven
Development and testing of the CMIN-BCM for monitoring borehole closure in underground environments

Top

Gamal El-Dean, Deyab
Correlations between Low and High Strain Stiffnesses of few Natural and Artificial Cohesive Soils

The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Gan, Julian
Post VSD aided test column characterization of consolidation properties of oil sands tailings

Gatmiri, Behrouz
Ground nonlinear dynamic response by considering multi-dimensional seismic site effects

Gauthier, Carl
Hazard identification, stability assessment and risk mitigation overview of near-surface openings and pillars at the former Mine Principale, in Chibougamau, Quebec

Gauthier, Dave
Large Scale Flood, Steep Creek, and Landslide-Dam Flood Risk Prioritization in British Columbia, Canada

Railway geohazard risk management: some practical experiences with geohazard warning thresholds

Ghafghazi, Mason
A Numerical Study of the Effects of Contact Friction on CPT Results

Effect of Imperfect Direct Simple Shear Test Boundary Conditions on Calibration of Constitutive Models

Influence of Fines Content on Cyclic Resistance through the Critical State Framework

Ghali, Michael
A laboratory-based study correlating the large-strain static constrained modulus to the small-strain shear modulus for clean sands

The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Ghasemi, Hussein
Evaluation of Inclinometer Errors and Their Impacts on Data Accuracy (Case Study: Karkheh Dam & Galabar Dam)

Ghassemi, Ali
Assessment of the Effects of Climate Change on Slope Stability Using Local Factor of Safety

Effect of climate change on soil embankment stability

Ghavamshirazi, Sandra
Effect of aggressive solution and soaking on shear strength of marl clay stabilized by co-polymer of vinyl acetate and acrylic esters

Gheisari, Narges
Structuration in natural clays, dredged sediments, and oil sands tailings

Ghlamallah, Noureddine
Comparative analysis of Hydro-Station liquefaction potential: A case study

Comparative study of several methods of axial design of piles located in a thick clay deposit: Pierre-de-Saurel wind farm case

Gilman, Tony
3D Geological Modelling as a Tool for Evaluating Foundations – A Case Study for Lower Baker Dam, Washington State, USA

Alternative to Soldier Pile Walls – Using Anchored HighTensile Steel Mesh for Temporary Excavation Support in an Urban Environment

Golhashem, Mohammad Reza
Effect of aggressive solution and soaking on shear strength of marl clay stabilized by co-polymer of vinyl acetate and acrylic esters

Gonsalves, Stan
Cofferdam Failure - Geotechnical Lesson Learned

Remediation of Slope Failure in the Application of Lightweight Fill and Timber Piles on Highway 17 in Ontario

González-Hurtado, J.
Measurements of ground-borne vibrations at two operational wind turbine facilities

Grabinsky, Murray
Volumetric change measurement for Cemented Paste Backfill under high isotropic compression: laboratory challenges and tips

Gräpel, Chris
The use and limitations of modern technologies for slow, vegetated landslide monitoring – Chin Coulee Landslide

Gregory, Ryan
An analytical parametric study of pipeline embedment into the seabed

Gudina, Simon
Integrity testing of concrete deep foundation with focus on thermal methods

Guittonny, Marie
Saturated-unsaturated numerical modelling of a vertically heterogeneous monolayer cover with an elevated water table: the Manitou site case study

Guo, Peijun
Measurement of Stress in Sand

Gurpersaud, Naresh
Fundamental mechanism of cement in stabilizing Champlain Sea clay

Specialty grouting techniques: Technical considerations and applications in Canada

Habib, J.
Calibration of P-Y Curves Using Lateral Load Test Results in Cohesive and Cohesionless Soils for Large Diameter Drilled Shaft

Top

Load testing of large diameter single drilled shaft foundations for the REM project in Montreal

Hamdani, A.
Interpretation and analysis of a test embankment on soft clay

Hamilton, Kyle
Controlling Risk to Critical Infrastructure during Construction: Seine Riverbank Stabilization at the Branch 1 Aqueduct, Winnipeg, Manitoba

Han, Zhong
Specialty grouting techniques: Technical considerations and applications in Canada

Hansler, Susan
York Region mining project’s geotechnical and hydrogeological challenges overcome through the project design

Harrison, Charlie
Analyses of climatic data to determine the frost penetration depth based on statistical analyses and matching to measured ground temperature profiles

Assessment of rapid drawdown of a cofferdam and main dam using a coupled transient seepage-stability model that considers the reservoir level increase, steady-state level duration, and drawdown using actual hydrographic data for a given river

Haug, Moir D.
Post VSD aided test column characterization of consolidation properties of oil sands tailings

Hawlader, Bipul
An approach for finite element modeling of one-dimensional thaw consolidation

Dynamic behaviour of dry sand in simple shear loading at a wide range of normal stresses

Finite element modeling of jacked piles in clay and loose sand

Modeling of seepage using a Eulerian-based finite element method

Modeling the Impact of Earthquake-Induced Sensitive Clay Landslide on an Exposed Pipeline Using a Large Deformation Finite Element Method

Shear strength assessment of a well-graded clean sand

Some aspects of offshore pipeline design against upheaval buckling

Hendry, Michael T.
Additional Tools for the Study of Variable Water Content Effects on a Slow-Moving Landslide

Benefits and challenges of applying GB-InSAR for use in civil projects in Canada, and ways forward

Effect of Fiber Content on the Mechanical Behavior of Fiber-Reinforced Clay

Frost susceptibility of subgrade soil beneath railway tracks: Case Study

The use and limitations of modern technologies for slow, vegetated landslide monitoring – Chin Coulee Landslide

Henry, Jasyn
Preliminary Design For Seepage Remediation at a Small, Remote Dam – Case Study of Lac La Ronge Dam in Northern Saskatchewan

Himeno, Toshiyuki
Comparison of sedimentary environment and geotechnical properties of Lake Agassiz and Ariake clays for application of Deep Mixing Method

Hino, Takenori
Comparison of sedimentary environment and geotechnical properties of Lake Agassiz and Ariake clays for application of Deep Mixing Method

Hoentzsch, Stefan
The impact of a salt deposit’s origin on its exploitation: three case-studies from underground mining operations

Holländer, Hartmut
Performance of ground-source heat pump systems in cold regions: a case study

The application of horizontal geothermal systems in Gillam (Manitoba): a case study

Thermo-mechanical performance of a geothermal pile system for re-harvesting the energy loss through the basement of a building in cold regions

Holm, Kris
Large Scale Flood, Steep Creek, and Landslide-Dam Flood Risk Prioritization in British Columbia, Canada

Hosseini, M.A.
Seismic Performance Of Hollow Fibre-Reinforced Polymer (FRP) Piles in Cohesionless Soils

Huang, Daniel
Use of Lightweight Fill Materials for MSE Wall

Huntley, D.
Additional Tools for the Study of Variable Water Content Effects on a Slow-Moving Landslide

Hurich, Charles
Empirical Procedure Investigation for Sandstone Anisotropy Evaluation: Part I

Empirical Procedure Investigation for Sandstone Anisotropy Evaluation: Part II

Hurtubise, Rebecca R.
Development of a waste rock simulation model to mitigate environmental impacts of acid rock drainage

Hussien, Mahmoud N.
Comparative analysis of Hydro-Station liquefaction potential: A case study

The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Hutchinson, D. Jean
Application of LiDAR technology for the assessment of mechanical scaling conditions in underground mines and tunnels

The impact of a salt deposit’s origin on its exploitation: three case-studies from underground mining operations

The Influence of Asperities, Joint Topology and Stress on Fracture Geomechanical Properties

Igbinedion, D.
Creep and structuration in centrifuge cake oil sands tailings

Top

Ingabire, Edouardine-Pascale
Influence of Fines Content on Cyclic Resistance through the Critical State Framework

Iranpour, Mohammad (Sasan)
A Novel Approach for Performance-Based Design of Piles and Shafts under Liquefaction using Coupled Nonlinear Soil-Structure Interaction Analysis

Islam, Mohammad Shariful
Prediction of Compressibility Characteristics of In-situ Cohesive Soil using Reconstituted Sample

Islam, Naveel
A coupled numerical approach for assessing the bearing capacity of an eccentrically loaded foundation on layered cohesionless soil near a slope

Modeling the Impact of Earthquake-Induced Sensitive Clay Landslide on an Exposed Pipeline Using a Large Deformation Finite Element Method

Prediction of Compressibility Characteristics of In-situ Cohesive Soil using Reconstituted Sample

Jafari, Mohammadamin
Volumetric change measurement for Cemented Paste Backfill under high isotropic compression: laboratory challenges and tips

Top

Jahanbakhshzadeh, A.
Influence of pore water pressures on the stress state in inclined backfilled stopes

On the seismic response of tailings dikes constructed with the upstream and center-line methods

Jakob, Matthias
Large Scale Flood, Steep Creek, and Landslide-Dam Flood Risk Prioritization in British Columbia, Canada

Javankhoshdel, Sina
A more accurate way to measure spatial correlation length from CPT data – ARMA models

General probabilistic analysis of simple reinforced slopes using RLEM approach

Jesswein, Markus
Correlation between the PDA-Derived Pile Side Resistance and Undrained Shear Strength of Clays in Alberta

Reliability-Based Design for the Serviceability Limit State of Axially-Loaded Driven Piles in Ontario Soils

Jeudy, Betegard
Evaluation of liquefaction resistance of a silty soil using DSS and TxSS tests

Judge, Ken
Development and testing of the CMIN-BCM for monitoring borehole closure in underground environments

Kabamba, Cyrille Ngandu
Assessment of the influence of aqueous solutions chemistry on the water absorbency of recycled superabsorbent polymers

Top

Évaluation du potentiel de séquestration des métaux lourds contenus dans des pulpes de résidus miniers par les polymères superabsorbants (PSA)

Optimization of superabsorbent polymers (SAPs) dosage for dewatering mine tailings slurry

Kabwe, Louis K.
The effect of flyash addition on the consolidation properties and shear strength of oil sands fluid fine tailings

Kachhwal, Laxmi Kant
A geosynthetic reinforced earth retaining structure to eliminate lateral earth pressure on concrete grade beam walls – a case study

Kaluzny, Samuel W.
Modelling embankment temperatures in Arctic highways using thermal modifiers and surface energy balance boundary conditions

Preliminary deformation detection of high-fill sections along the Inuvik-Tuktoyaktuk Highway using UAV photogrammetry

Kanteye, Ousseynou
Lime stabilization of soil-sludge mixtures for a potential use in oxygen barrier for mine site rehabilitation

Karmaker, Ripon
Finite element modeling of jacked piles in clay and loose sand

Karray, Mourad
A laboratory-based study correlating the large-strain static constrained modulus to the small-strain shear modulus for clean sands

A useful tool to evaluate the seismic stability of clayey slopes: the spectral pseudo-static approach

Comparative analysis of Hydro-Station liquefaction potential: A case study

Evaluation of liquefaction resistance of a silty soil using DSS and TxSS tests

Experimental observation of a soft clay consolidation behavior using constant-rate-of-strain (CRS) test

Geotechnical Characterization of a Glacio-Lacustrine Clay Deposit of the Abitibi Region – Case Study

The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Toward the post-seismic settlement assessment in the laboratory

Katebi, Mohammad
A study on the effects of slope grade on the soil-pipeline interaction loading

Kelly, Allen
Preliminary Design For Seepage Remediation at a Small, Remote Dam – Case Study of Lac La Ronge Dam in Northern Saskatchewan

Kenyon, Rob
Controlling Risk to Critical Infrastructure during Construction: Seine Riverbank Stabilization at the Branch 1 Aqueduct, Winnipeg, Manitoba

Khater, K.R.
Conventional method to estimate settlement of plate subjected to bi-axial loading – Part I

Equations to Correct SPT-N Values Obtained from Using Non-Standard Hammer Weight – Part II

Khatibi, Amir
A poromechanics approach to assess the effect of frost heave on double-barrel culverts in cold regions

Khayat, Kamal
The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Kheradmand, Elham
3D Simulation of Packing of Heterogeneous Ellipsoidal Particles using Discrete Element Method

Khidri, Mujtaba
Field Axial Testing of Screw Micropiles in Sand and SPT-based Estimation Method

Khoshboresh, Amir R.
An Analytical Solution for Deformation of Underground Openings Excavated in Fractured Rocks

Kim, Tae C.
Cofferdam Failure - Geotechnical Lesson Learned

Remediation of Slope Failure in the Application of Lightweight Fill and Timber Piles on Highway 17 in Ontario

Kiss, J.
Measurements of ground-borne vibrations at two operational wind turbine facilities

Kjennbakken, H.
Extraction of depth to bedrock from airborne electromagnetic data using artificial neural networks

Klassen, Christopher
Soil Profiling of Pleistocene Deposits in the Athabasca Oil Sands using SCPTu

Kondrachova, Tamara
York Region mining project’s geotechnical and hydrogeological challenges overcome through the project design

Konrad, Jean-Marie
Modifying the NorSand soil model to improve static simple shear behaviour predictions

Koubikana Pambou, Claude Hugo
Improving ground heat exchangers for geothermal heat pump systems with a groundwater-filled borehole and a thermally enhanced double U-pipe

Kozun, Ryan
Preliminary Design For Seepage Remediation at a Small, Remote Dam – Case Study of Lac La Ronge Dam in Northern Saskatchewan

Krol, Magdalena
Effect of Temperature on Cadmium Sorption in Sand and Clay

Küpper, Angela
Construction of the A21 Dike at the Diavik Diamond Mine

Kurz, David
Settlement Analysis on Glacio-Lacustrine Clays using Observational Method for a New Interchange in Winnipeg, Manitoba

Kwak, Minkyung
Hogg’s Hollow Highway 401 Bridge Widening, Toronto, Canada

Reliability-Based Design for the Serviceability Limit State of Axially-Loaded Driven Piles in Ontario Soils

Kwemo, Patrice
Improving ground heat exchangers for geothermal heat pump systems with a groundwater-filled borehole and a thermally enhanced double U-pipe

Kwok, Charles
Construction of Road Embankment over Priddis Slough Using Wick Drains and Preloading

Kyzym, Igor
Determination of the formation properties from Rotary Percussion Drilling data

Labrie, Denis
Development and testing of the CMIN-BCM for monitoring borehole closure in underground environments

Top

Laforest, Marc
3D Simulation of Packing of Heterogeneous Ellipsoidal Particles using Discrete Element Method

Landry-Paré, Lilianne
Geotechnical instrumentation of a tangent cast-in-place pile wall in Peace River, Alberta

Lapierre, Jerome
The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Lashin, Ibrahim
A laboratory-based study correlating the large-strain static constrained modulus to the small-strain shear modulus for clean sands

The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Lato, Matt
Assessing landslide deformation using trees in terrestrial lidar data

Railway geohazard risk management: some practical experiences with geohazard warning thresholds

Lau, Carie-Ann
Large Scale Flood, Steep Creek, and Landslide-Dam Flood Risk Prioritization in British Columbia, Canada

Lavoie, Jean-François
Improving ground heat exchangers for geothermal heat pump systems with a groundwater-filled borehole and a thermally enhanced double U-pipe

Leawood, Sam
An analytical parametric study of uplifting resistance in buried pipelines

Lecuru, Quentin
The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Lederman, Margot
Soil Profiling of Pleistocene Deposits in the Athabasca Oil Sands using SCPTu

Ledoux, Catherine
A useful tool to evaluate the seismic stability of clayey slopes: the spectral pseudo-static approach

Prioritization of Slope Stabilization Work on Québec's Road Network

Lee, Rebecca
Large Scale Flood, Steep Creek, and Landslide-Dam Flood Risk Prioritization in British Columbia, Canada

Lees, Daniel
Specialty grouting techniques: Technical considerations and applications in Canada

Lefebvre, Guy
The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Leik, Adam
Evaluating the feasibility of using guanidinium salts as a means of in-situ soil strengthening

Lemay, Jean-François
Assessment of the influence of aqueous solutions chemistry on the water absorbency of recycled superabsorbent polymers

Optimization of superabsorbent polymers (SAPs) dosage for dewatering mine tailings slurry

Leroueil, S.
Numerical modelling of downward progressive failure in sensitive clays: the case of the 1976 landslide at Saint-Fabien, Québec

Lessard, Geneviève
An assessment of hydrogeological properties of waste rock using infiltration tests and numerical simulations

Lewycky, Don
The estimated economic impacts of prairie landslides in western Canada

Li, L.
Influence of pore water pressures on the stress state in inclined backfilled stopes

Li, Maoxin
Internal Erosion of Zoned Earthfill Dams and Their Foundations: Commentary on the State-of-Practice

Li, Yingyi
Highway 27:10 – Replacement of Red Deer River Bridge East of Morrin, Alberta: Abutment Stability Pile Wall

Li, Zijian
Determination of the formation properties from Rotary Percussion Drilling data

Subsurface rock interface imaging with the application of Ground Penetrating Radar (GPR)

Limoges Shaigetz, Marielle
Geotechnical Characterization of a Glacio-Lacustrine Clay Deposit of the Abitibi Region – Case Study

Linero, Sandra
Suction effects on the compressibility and creep of crushable sands

Liu, Hongwei
A poromechanics approach to assess the effect of frost heave on double-barrel culverts in cold regions

Dynamic Poroelasticity Based Method for Falling Weight Deflectometer Test Analysis

Liu, Jinyuan
A deviatoric softening law for predicting the deformation of soft clays subject to anisotropic consolidation

Correlation between the PDA-Derived Pile Side Resistance and Undrained Shear Strength of Clays in Alberta

Fundamental mechanism of cement in stabilizing Champlain Sea clay

Reliability-Based Design for the Serviceability Limit State of Axially-Loaded Driven Piles in Ontario Soils

Lloyd, Matthew
Landslide Susceptibility Mapping for Large Landslides in Saskatchewan

Locat, Ariane
Numerical modelling of downward progressive failure in sensitive clays: the case of the 1976 landslide at Saint-Fabien, Québec

The energy reduction factor for flowslides: a new parameter to assess the energy used for landslide-tsunami initiation

Locat, Jacques
The energy reduction factor for flowslides: a new parameter to assess the energy used for landslide-tsunami initiation

Locat, Pascal
A useful tool to evaluate the seismic stability of clayey slopes: the spectral pseudo-static approach

Influence of surficial crusts on the development of spreads and flows in Eastern Canadian sensitive clays

Luis, Adriana
Image Analysis Method for Estimating Porosity Distribution of Soilcrete

Lun, Martin
Construction of Road Embankment over Priddis Slough Using Wick Drains and Preloading

Luo, Zhe
Evaluation of the costs and benefits of natural and grey infrastructures for the protection of the Lake Erie shoreline

Reliability-based design cost optimization of laterally loaded drilled shafts considering spatial variability of clays

Lysdahl, A.O.
Extraction of depth to bedrock from airborne electromagnetic data using artificial neural networks

Macciotta, Renato
Benefits and challenges of applying GB-InSAR for use in civil projects in Canada, and ways forward

Top

Closure and the Long-term Behaviour of Tailings Dams: Using Industry Experience to Fill in the Gaps

The use and limitations of modern technologies for slow, vegetated landslide monitoring – Chin Coulee Landslide

MacDonald, Brent
Energy-Based Design of Sustainable Earthworks Compaction

Mackey, Scudder D.
Evaluation of the costs and benefits of natural and grey infrastructures for the protection of the Lake Erie shoreline

Maghoul, Pooneh
A poromechanics approach to assess the effect of frost heave on double-barrel culverts in cold regions

A study on the effects of slope grade on the soil-pipeline interaction loading

Dynamic Poroelasticity Based Method for Falling Weight Deflectometer Test Analysis

Ground nonlinear dynamic response by considering multi-dimensional seismic site effects

Numerical investigation of concrete energy pile behavior in Winnipeg using coupled thermo-hydro-mechanical finite element analyses

Performance of ground-source heat pump systems in cold regions: a case study

The application of horizontal geothermal systems in Gillam (Manitoba): a case study

Thermo-mechanical performance of a geothermal pile system for re-harvesting the energy loss through the basement of a building in cold regions

Maleksaeedi, Emad
Experimental observation of a soft clay consolidation behavior using constant-rate-of-strain (CRS) test

Modelling the dependency of the soil-water retention behavior on the initial void ratio in unsaturated soils

Manmatharajan, Mathan V.
Effect of Imperfect Direct Simple Shear Test Boundary Conditions on Calibration of Constitutive Models

Maqsoud, Abdelkabir
Assessment of the influence of aqueous solutions chemistry on the water absorbency of recycled superabsorbent polymers

Évaluation du potentiel de séquestration des métaux lourds contenus dans des pulpes de résidus miniers par les polymères superabsorbants (PSA)

Lime stabilization of soil-sludge mixtures for a potential use in oxygen barrier for mine site rehabilitation

Optimization of superabsorbent polymers (SAPs) dosage for dewatering mine tailings slurry

Saturated-unsaturated numerical modelling of a vertically heterogeneous monolayer cover with an elevated water table: the Manitou site case study

Marcotte, Bryce
A Low-Cost Automated SWCC Device and Data Analysis Procedure For Unsaturated Soils Exhibiting Volume Change

Marcoux, Pierre
Rock slope stability and snow disposal capacity optimization, St-Michel Quarry, City of Montréal

Marefat, Vahid
Runoff and infiltration estimates based on pore pressure changes in shallow aquitards

Marsh, Julia
Benefits and challenges of applying GB-InSAR for use in civil projects in Canada, and ways forward

Martens, Scott
Soil Profiling of Pleistocene Deposits in the Athabasca Oil Sands using SCPTu

Martin, Vincent
An assessment of hydrogeological properties of waste rock using infiltration tests and numerical simulations

Martinez, Luis A.
Geotechnical instrumentation of a tangent cast-in-place pile wall in Peace River, Alberta

Matich, M.A.J. (Fred)
Some Geotechnical Aspects of Land-to-Sea Transition Zones

Mbonimpa, Mamert
Assessment of the influence of aqueous solutions chemistry on the water absorbency of recycled superabsorbent polymers

Évaluation du potentiel de séquestration des métaux lourds contenus dans des pulpes de résidus miniers par les polymères superabsorbants (PSA)

Lime stabilization of soil-sludge mixtures for a potential use in oxygen barrier for mine site rehabilitation

Optimization of superabsorbent polymers (SAPs) dosage for dewatering mine tailings slurry

McCaw, J.
Parameter Variation Analyses of Thermal Properties Used in Ground Temperature Simulations

McClement, B.
Hydro-TISAR and Hydro-SEEp – Innovative geophysical techniques for geotechnical and hydrogeological investigations

McCombe, Jessica
Controlling Risk to Critical Infrastructure during Construction: Seine Riverbank Stabilization at the Branch 1 Aqueduct, Winnipeg, Manitoba

McCusker, Linda
Controlling Risk to Critical Infrastructure during Construction: Seine Riverbank Stabilization at the Branch 1 Aqueduct, Winnipeg, Manitoba

McDougall, S.D.
Consolidation Behaviour of Colluvium Derived from Overconsolidated Glaciolacustrine Deposits Under Highway Embankment Fills

McNicoll, Scott
Hazard identification, stability assessment and risk mitigation overview of near-surface openings and pillars at the former Mine Principale, in Chibougamau, Quebec

McPherson, Rob
Landslide Susceptibility Mapping for Large Landslides in Saskatchewan

Menaa, Merouane
Comparative study of several methods of axial design of piles located in a thick clay deposit: Pierre-de-Saurel wind farm case

Metcalfe, B.
Full Scale Foundation Testing of Rammed Aggregate Pier® Supported Foundations in the Toronto Waterfront

Mhenni, Ahmed
The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Micic, Silvana
Cofferdam Failure - Geotechnical Lesson Learned

Remediation of Slope Failure in the Application of Lightweight Fill and Timber Piles on Highway 17 in Ontario

Miranda, Ramon
Construction of a Multi-Use Pathway on Soft Compressible Deposits– Case Study

Mirghasemi, Ali A.
Evaluation of Inclinometer Errors and Their Impacts on Data Accuracy (Case Study: Karkheh Dam & Galabar Dam)

Mitchell, A.D.
Consolidation Behaviour of Colluvium Derived from Overconsolidated Glaciolacustrine Deposits Under Highway Embankment Fills

Mitchell, Andrew
Assessing landslide deformation using trees in terrestrial lidar data

Mog, Kunjari
Dynamic properties of silty-sand varying saturation in a cyclic triaxial test

Moghaddam, Reza
A comparison between free-field shear strain profiles using natural and synthetic earthquake motions in a case study

Mohamed, Chekired
Comparative analysis of Hydro-Station liquefaction potential: A case study

Evaluation of liquefaction resistance of a silty soil using DSS and TxSS tests

Modelling the dependency of the soil-water retention behavior on the initial void ratio in unsaturated soils

Toward the post-seismic settlement assessment in the laboratory

Moharrami, Mohammad Javad
Analytical assessment of the drilling risers stability in the Newfoundland deep offshore

Analytical Modeling of Well-Conductor Seabed Interaction in Complex Layered Soil in Newfoundland Offshore

Mole, Jonathan
A useful tool to evaluate the seismic stability of clayey slopes: the spectral pseudo-static approach

Molgaard, John
Empirical Procedure Investigation for Sandstone Anisotropy Evaluation: Part I

Empirical Procedure Investigation for Sandstone Anisotropy Evaluation: Part II

Mompin, Rémi
A useful tool to evaluate the seismic stability of clayey slopes: the spectral pseudo-static approach

Monsif, Moulay Youssef
Fundamental mechanism of cement in stabilizing Champlain Sea clay

Moran, Patrick
Groundwater Occurrence at, and Advanced Dewatering of, a Geologically Complex Orebody at the Iron Ore Company of Canada Open Pit Mine in Subarctic Labrador Canada

Morgan, Andrea
Low temperature geothermal resources in the Canadian Shield: The feasibility of using water from flooded mines as an energy source in Northern Quebec

Mousavi, Sobhan
General probabilistic analysis of simple reinforced slopes using RLEM approach

Moussa, Ahmed
Dynamic Properties of Tire-Derived Aggregates

Mozaffari, Mohammad
A Numerical Study of the Effects of Contact Friction on CPT Results

Mulligan, C.N.
Discovery of indigenous biosurfactant-producing oil-degrading species from oily tailings ponds waste and its biodegradation ability

Mykland, J.
Extraction of depth to bedrock from airborne electromagnetic data using artificial neural networks

Mysiorek, J.
Engineering Geological Characterization of the 2014 Jure Nepal Landslide: The Future of Interactive Mixed Reality Field Sites, Hazard Identification and Mitigation Through Game Engines

Nackers, Claudine
Comparative analysis of Hydro-Station liquefaction potential: A case study

Top

Naghavi, Naemeh
A comparison between free-field shear strain profiles using natural and synthetic earthquake motions in a case study

Naghibi, Farzaneh
Considerations for Resistance Factor Calibration in the National Building Code of Canada

Naji, Siwar
The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Nasir, Othman
Application of Random Set Finite Difference Method into a deep urban excavation

Near-Field Thermo-Mechanical Coupled Processes in Host Rocks of High-Level Waste Deep Geological Repositories

Nasseri-Moghaddam, Ali
Evaluation of liquefaction potential for a dam using combination of traditional and performance based seismic design methods

Laboratory Method for Determining Thermal Resistivity of a Coarse Aggregate Mixture

Néron, Nicolas
Ageing of cement grouted joint by water and acidic flows for assessing dam foundation quality

Newson, T.A.
Measurements of ground-borne vibrations at two operational wind turbine facilities

Nujaim, M.
Use of a reduced scale physical model of a mine stope for assessing waste rock barricades potential instabilities due to early age pastefill pressure

Nuth, Mathieu
Experimental observation of a soft clay consolidation behavior using constant-rate-of-strain (CRS) test

Modelling the dependency of the soil-water retention behavior on the initial void ratio in unsaturated soils

Oh, Won Taek
Application of Random Set Finite Difference Method into a deep urban excavation

Top

Influence of tension cracks on the stability of unsupported vertical trenches in vadose zone

Near-Field Thermo-Mechanical Coupled Processes in Host Rocks of High-Level Waste Deep Geological Repositories

Olshansky, D.
Full Scale Foundation Testing of Rammed Aggregate Pier® Supported Foundations in the Toronto Waterfront

Onsel, I.E.
Engineering Geological Characterization of the 2014 Jure Nepal Landslide: The Future of Interactive Mixed Reality Field Sites, Hazard Identification and Mitigation Through Game Engines

Osback, Jon
Pile Driving Effects on a Steel Truss Railway Bridge During Rehabilitation

Osses, Rodrigo
Suction effects on the compressibility and creep of crushable sands

Ovalle, Carlos
Suction effects on the compressibility and creep of crushable sands

Ozden, Zuhtu
Hogg’s Hollow Highway 401 Bridge Widening, Toronto, Canada

O’Connor, Tyler
The axial response of fully grouted rock bolts using a distributed fiber optic sensor technique

Packulak, T.R.
The Influence of Asperities, Joint Topology and Stress on Fracture Geomechanical Properties

Top

Padros, Gustavo
Cylindrical shear resistance of helical piles subjected to seismic loads

Palat, A.
Effect of Fiber Content on the Mechanical Behavior of Fiber-Reinforced Clay

Papadimitropoulos, Prokopi
Settlement Analysis on Glacio-Lacustrine Clays using Observational Method for a New Interchange in Winnipeg, Manitoba

Paquet-Bouchard, Bruno
Prioritization of Slope Stabilization Work on Québec's Road Network

Peaker, Scott
Use of micropiles in Southern Ontario

Pedram, Behrang
Behavior of Circular and Square Monopile Structures Installed in Normally Consolidated Clays

Pépin, Nicolas
Geotechnical Characterization of a Glacio-Lacustrine Clay Deposit of the Abitibi Region – Case Study

Perret, Didier
Influence of surficial crusts on the development of spreads and flows in Eastern Canadian sensitive clays

Pfaffhuber, A.A.
Extraction of depth to bedrock from airborne electromagnetic data using artificial neural networks

Phillips, Ryan
Formulation of 3D Soil Springs for Pipe Stress Analyses

Pigrim, Rick
Subsurface rock interface imaging with the application of Ground Penetrating Radar (GPR)

Pike, Kenton
Modeling of seepage using a Eulerian-based finite element method

Pineda, Jubert
Suction effects on the compressibility and creep of crushable sands

Pinheiro, Mauricio
Geotechnical instrumentation of a tangent cast-in-place pile wall in Peace River, Alberta

Polak, Jason
Soil Profiling of Pleistocene Deposits in the Athabasca Oil Sands using SCPTu

Polan, Bruce
Laboratory Method for Determining Thermal Resistivity of a Coarse Aggregate Mixture

Poor moosavian, Seyedmehdi
Application of Random Set Finite Difference Method into a deep urban excavation

Porter, Michael
Assessing landslide deformation using trees in terrestrial lidar data

The estimated economic impacts of prairie landslides in western Canada

Poudama, Lotiyé Elisée
Assessment of the influence of aqueous solutions chemistry on the water absorbency of recycled superabsorbent polymers

Évaluation du potentiel de séquestration des métaux lourds contenus dans des pulpes de résidus miniers par les polymères superabsorbants (PSA)

Optimization of superabsorbent polymers (SAPs) dosage for dewatering mine tailings slurry

Proskin, Samuel A.
Using a limit states approach for ice road design

Proudfoot, Donald
Highway 27:10 – Replacement of Red Deer River Bridge East of Morrin, Alberta: Abutment Stability Pile Wall

Landslide Stabilization Using Wick Drain Dewatering of Artesian Groundwater Pressures – Highway 40:30 North of Hinton, Alberta

Prudhomme, Serge
3D Simulation of Packing of Heterogeneous Ellipsoidal Particles using Discrete Element Method

Pu, Chi
Evaluating the feasibility of using guanidinium salts as a means of in-situ soil strengthening

Pugi, Benjamin
Rock slope stability and snow disposal capacity optimization, St-Michel Quarry, City of Montréal

Qi, Shunchao
Structuration in natural clays, dredged sediments, and oil sands tailings

Top

Qiu, Hongyuan
Determination of the formation properties from Rotary Percussion Drilling data

Quinn, Joseph
Soil Profiling of Pleistocene Deposits in the Athabasca Oil Sands using SCPTu

Quinn, Pete
Landslide Susceptibility Mapping for Large Landslides in Saskatchewan

Railway geohazard risk management: some practical experiences with geohazard warning thresholds

Some mathematical musings about extreme events for geotechnical risk, without (much of) the math

Quirion, Marco
Determining the most representative parameter for quantifying the rock block size used for evaluating the hydraulic erodibility of rock

Rahimi, M.
Discovery of indigenous biosurfactant-producing oil-degrading species from oily tailings ponds waste and its biodegradation ability

Top

Rahman, Muhammad Abdur
A coupled numerical approach for assessing the bearing capacity of an eccentrically loaded foundation on layered cohesionless soil near a slope

Rahman, Mujib
Framework for Assessing Integrity of Natural Gas Distribution Pipes in Landslide Areas

Pulling rate effects on the pullout force of buried small diameter MDPE pipe in loose sand

Ramos, Eloy
Innovative Tunneling in the Norris Cut Channel

Rancourt, André J.
Rock slope stability and snow disposal capacity optimization, St-Michel Quarry, City of Montréal

Rasmussen, Henrik
Hazard identification, stability assessment and risk mitigation overview of near-surface openings and pillars at the former Mine Principale, in Chibougamau, Quebec

Rayhani, M.T.
Seismic Performance Of Hollow Fibre-Reinforced Polymer (FRP) Piles in Cohesionless Soils

Raymond, Jasmin
Improving ground heat exchangers for geothermal heat pump systems with a groundwater-filled borehole and a thermally enhanced double U-pipe

Low temperature geothermal resources in the Canadian Shield: The feasibility of using water from flooded mines as an energy source in Northern Quebec

Reinert, Juliana
Ageing of a Geocomposite Drain used in landfills applications – an initial study

Rennie, Cooper
Large Scale Flood, Steep Creek, and Landslide-Dam Flood Risk Prioritization in British Columbia, Canada

Reza, Auchib
Pulling rate effects on the pullout force of buried small diameter MDPE pipe in loose sand

Riddell, B.
Interpretation and analysis of a test embankment on soft clay

Rivard, Patrice
Ageing of cement grouted joint by water and acidic flows for assessing dam foundation quality

On the evaluation of JRC effect on the shear strength of rock joints: reverse modelling of rock joints using a geostatistical semivariogram model and 3D printing

Robert, D.J.
An approach for finite element modeling of one-dimensional thaw consolidation

Roca, Joan
Construction of the A21 Dike at the Diavik Diamond Mine

Roghani, A.
Frost susceptibility of subgrade soil beneath railway tracks: Case Study

Romdhane, Mohamed Ben
The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Rosser, N.
Engineering Geological Characterization of the 2014 Jure Nepal Landslide: The Future of Interactive Mixed Reality Field Sites, Hazard Identification and Mitigation Through Game Engines

Roubtsova, Varvara
3D Simulation of Packing of Heterogeneous Ellipsoidal Particles using Discrete Element Method

Rouleau, Alain
Combining shallow hydrogeological characterization with borehole data for determining hydrofacies in the Valin River paleodelta

Roustaei, M.
Effect of Fiber Content on the Mechanical Behavior of Fiber-Reinforced Clay

Frost susceptibility of subgrade soil beneath railway tracks: Case Study

Rowe, R. Kerry
Ageing of a Geocomposite Drain used in landfills applications – an initial study

Roy, Kshama
A study on the effects of slope grade on the soil-pipeline interaction loading

Modeling of seepage using a Eulerian-based finite element method

Modeling the Impact of Earthquake-Induced Sensitive Clay Landslide on an Exposed Pipeline Using a Large Deformation Finite Element Method

Royce, Justin
Subsurface rock interface imaging with the application of Ground Penetrating Radar (GPR)

Ruel, Mario
Stabilization of Rail Track Bed Mile 9.0 – 9.1, CN, Dundas Subdivision

Ruffing, Daniel
Case study: Design-build of a cement-bentonite groundwater cutoff wall in Fort-McMurray

Case Study: Installation of a Soil-Cement-Bentonite Groundwater Cutoff Wall in Argentia, NL

Rwamurinda, Shyaka Auguste
Assessment of the influence of aqueous solutions chemistry on the water absorbency of recycled superabsorbent polymers

Saab, Alaeddine
Numerical Modeling of High Embankment Built on Soft Soil

Top

Saadat, Farbod
Geotechnical, Geophysical and Hydrogeological Characterization of Soft Sensitive Leda Clay in Ottawa and Associated Challenges in Foundation Seismic Design

Saaly, Maryam
Thermo-mechanical performance of a geothermal pile system for re-harvesting the energy loss through the basement of a building in cold regions

Saborimanesh, N.
Discovery of indigenous biosurfactant-producing oil-degrading species from oily tailings ponds waste and its biodegradation ability

Sadeghian, Pedram
1g model tests of vertically loaded GFRP piles

Sadrekarimi, Abouzar
Prediction of Static Liquefaction Landslides

Saeidi, Ali
Determining the most representative parameter for quantifying the rock block size used for evaluating the hydraulic erodibility of rock

Saha, Riju Chandra
Shear strength assessment of a well-graded clean sand

Salam, Muhammad
Creep and structuration in centrifuge cake oil sands tailings

Structuration in natural clays, dredged sediments, and oil sands tailings

Saleh-Mbemba, Faustin
Physical modelling of tailings consolidation near a waste rock inclusion

Salloum, Tareq
A deviatoric softening law for predicting the deformation of soft clays subject to anisotropic consolidation

Sanchez-Marrou, Jose
Geotechnical characterization of igneous saprolite using the Seismic Cone Penetration Test (SCPTu) from a jungle site in South America

Sangam, Henri
Designing of Deep Foundation Systems for Offshore and Onshore Facilities – Similarities and Dissimilarities

Sangiuliano, Tony
Effect of climate change on soil embankment stability

Update on Rock Fill Settlement in a Highway Embankment in Northern Ontario: A Case Study

Sarlati, Sogol
Modelling the dependency of the soil-water retention behavior on the initial void ratio in unsaturated soils

Sattler, Kelvin
A Low-Cost Automated SWCC Device and Data Analysis Procedure For Unsaturated Soils Exhibiting Volume Change

Additional Tools for the Study of Variable Water Content Effects on a Slow-Moving Landslide

Schafer, Haley L.
Closure and the Long-term Behaviour of Tailings Dams: Using Industry Experience to Fill in the Gaps

Schafer, Matthew
State Parameter Estimation by CPTu Interpretation for Liquefaction Susceptibility – A Comparison of Methods

Schmidt, Richard
Cylindrical shear resistance of helical piles subjected to seismic loads

Schwarz, Lois G.
Numerical Modeling and Laboratory Validation of Geosynthetic Stabilized Structures

Scordo, Elisa
Large Scale Flood, Steep Creek, and Landslide-Dam Flood Risk Prioritization in British Columbia, Canada

Scott, J. Don
The effect of flyash addition on the consolidation properties and shear strength of oil sands fluid fine tailings

Scott, Jim
Some Geotechnical Aspects of Land-to-Sea Transition Zones

Sedran, Gabriel
Measurement of Stress in Sand

Shafaei, Amirhossein
Runoff and infiltration estimates based on pore pressure changes in shallow aquitards

Shah, Md. Shaheen
Investigation of Drilling Performance in Core Bit Drilling using passive-Vibration Assisted Rotary Drilling (p-VARD) Technology

Shahsavari, Mohammad
Volumetric change measurement for Cemented Paste Backfill under high isotropic compression: laboratory challenges and tips

Shalaby, Ahmed
A poromechanics approach to assess the effect of frost heave on double-barrel culverts in cold regions

Dynamic Poroelasticity Based Method for Falling Weight Deflectometer Test Analysis

Shams, Ghasem
On the evaluation of JRC effect on the shear strength of rock joints: reverse modelling of rock joints using a geostatistical semivariogram model and 3D printing

Shi, Cong
A deviatoric softening law for predicting the deformation of soft clays subject to anisotropic consolidation

Shiri, Hodjat
An analytical parametric study of lateral pipeline-soil interaction in partially embedded pipelines

An analytical parametric study of pipeline embedment into the seabed

An analytical parametric study of uplifting resistance in buried pipelines

Analytical assessment of the drilling risers stability in the Newfoundland deep offshore

Analytical Modeling of Well-Conductor Seabed Interaction in Complex Layered Soil in Newfoundland Offshore

The Influence of Slug Characteristics on Oscillation of Steel Catenary Risers in the Non-Linear Hysteretic Seabed

Siemens, G.
Parameter Variation Analyses of Thermal Properties Used in Ground Temperature Simulations

Simms, Paul
Creep and structuration in centrifuge cake oil sands tailings

Influence of pipeline transport on sedimentation and consolidation of flocculated Fluid Fine Tailings (fFFT)

Structuration in natural clays, dredged sediments, and oil sands tailings

Sinclair, Rob
Performance of ground-source heat pump systems in cold regions: a case study

The application of horizontal geothermal systems in Gillam (Manitoba): a case study

Sirois, Dominique
Railway geohazard risk management: some practical experiences with geohazard warning thresholds

Skaftfeld, Ken
Capacity of driven precast prestressed concrete hexagonal piles: a Winnipeg region geotechnical study

Skirrow, Roger
Landslide Stabilization Using Wick Drain Dewatering of Artesian Groundwater Pressures – Highway 40:30 North of Hinton, Alberta

Reconstruction of a roadway over an active landslide using lightweight cellular concrete

The estimated economic impacts of prairie landslides in western Canada

The use and limitations of modern technologies for slow, vegetated landslide monitoring – Chin Coulee Landslide

Skordaki, E.M.
Characterization and Environmental Risk Assessment Associated with a Sewage Lagoon Managed by the Canadian Armed Force

Optimization of sewage lagoon systems operations: An investigation into the removal of metals from wastewater

Snook, Quinn
An analytical parametric study of pipeline embedment into the seabed

Soliman, Nancy
The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Soysa, Achala
Observations on the effect of strain rate and loading rate on monotonic and cyclic direct simple shear response of reconstituted Fraser River silts

Stafford, Dylan M.J.
Preliminary deformation detection of high-fill sections along the Inuvik-Tuktoyaktuk Highway using UAV photogrammetry

Stead, D.
Engineering Geological Characterization of the 2014 Jure Nepal Landslide: The Future of Interactive Mixed Reality Field Sites, Hazard Identification and Mitigation Through Game Engines

Stenhouse, Mathew
Calgary Cancer Centre – Design and Construction Challenges for a Deep Excavation and Building Foundations within Lacustrine Clay

Stephenson, Gord
Construction of the A21 Dike at the Diavik Diamond Mine

Stewart, Tom
Benefits and challenges of applying GB-InSAR for use in civil projects in Canada, and ways forward

Stirling, J.L.
Consolidation Behaviour of Colluvium Derived from Overconsolidated Glaciolacustrine Deposits Under Highway Embankment Fills

Stolle, Dieter
Measurement of Stress in Sand

Sturzenegger, Matthieu
Large Scale Flood, Steep Creek, and Landslide-Dam Flood Risk Prioritization in British Columbia, Canada

Su, Ya
Longitudinal Displacement Profiles for Convergence-Confinement Analysis of Excavations: Applicability to Tunnelling, Limitations and Current Advancement

Subedi, Rabindra
Some aspects of offshore pipeline design against upheaval buckling

Sy, Alex
Influence of Fines Content on Cyclic Resistance through the Critical State Framework

Talesnick, M.
Pathology of a research error: Coefficient of earth pressure at-rest for cohesionless soils

Top

Tamrakar, Prajwol
Use of an Innovative Technology for Measuring Surface Roughness of Pavement

Tchabacha, Harlette
The Piezo-electric Ring Actuator technique (P-RAT) – 16 years of progress

Thavaraj, Thuraisamy
Challenges in Assessing a Hydraulic Fill Dam Built in the 1920s for Liquefaction and Piping Potential

Theron, Bernard
Innovative Tunneling in the Norris Cut Channel

Therrien, Julie
Influence of surficial crusts on the development of spreads and flows in Eastern Canadian sensitive clays

Tigchelaar, M.
Full Scale Foundation Testing of Rammed Aggregate Pier® Supported Foundations in the Toronto Waterfront

Tod, James
Hazard identification, stability assessment and risk mitigation overview of near-surface openings and pillars at the former Mine Principale, in Chibougamau, Quebec

Tran, Dat
Construction of Road Embankment over Priddis Slough Using Wick Drains and Preloading

Tremblay-Auger, F.
Numerical modelling of downward progressive failure in sensitive clays: the case of the 1976 landslide at Saint-Fabien, Québec

Trewin, Ron
Construction of a Multi-Use Pathway on Soft Compressible Deposits– Case Study

Trottier, Marc Olivier
Large Scale Flood, Steep Creek, and Landslide-Dam Flood Risk Prioritization in British Columbia, Canada

Turmel, Dominique
The energy reduction factor for flowslides: a new parameter to assess the energy used for landslide-tsunami initiation

Ubay, Irene Olivia
Numerical modelling of a clay core earth fill dam with and without creep deformation

Top

Uthayakumar, M. (Uthaya)
William R. Bennett bridge – Ten years of performance monitoring

Van Gassen, Wim
Assessing landslide deformation using trees in terrestrial lidar data

Top

Van Hove, Joel
The estimated economic impacts of prairie landslides in western Canada

van Veen, Megan
Assessing landslide deformation using trees in terrestrial lidar data

Vanapalli, Sai K.
A case study analysis of a landslide considering the residual shear strength of unsaturated soil

Varshoi, A.
Update on Rock Fill Settlement in a Highway Embankment in Northern Ontario: A Case Study

Vayali, George
Construction of Road Embankment over Priddis Slough Using Wick Drains and Preloading

Veenland, Allen
Reconstruction of a roadway over an active landslide using lightweight cellular concrete

Villaamil, Jaime
Assessment of rapid drawdown of a cofferdam and main dam using a coupled transient seepage-stability model that considers the reservoir level increase, steady-state level duration, and drawdown using actual hydrographic data for a given river

Vlachopoulos, Nicholas
Characterization and Environmental Risk Assessment Associated with a Sewage Lagoon Managed by the Canadian Armed Force

Longitudinal Displacement Profiles for Convergence-Confinement Analysis of Excavations: Applicability to Tunnelling, Limitations and Current Advancement

Optimization of sewage lagoon systems operations: An investigation into the removal of metals from wastewater

The axial response of fully grouted rock bolts using a distributed fiber optic sensor technique

Vöge, M.
Extraction of depth to bedrock from airborne electromagnetic data using artificial neural networks

Vogt-Breyer, Carola
Measurement of Stress in Sand

Wai, Daniel
Effect of Imperfect Direct Simple Shear Test Boundary Conditions on Calibration of Constitutive Models

Top

Walters, Dave
A comparison between free-field shear strain profiles using natural and synthetic earthquake motions in a case study

Wan, R.G.
Time-dependent isotache behaviour observed in physical soil-pipe interaction model tests – its practical implications on pipeline performance evaluation

Unconfined compression strength as consistency index for compacted clay in construction – a statistical approach

Wang, Chen
Finite element modeling of jacked piles in clay and loose sand

Modeling of seepage using a Eulerian-based finite element method

Wayne, Mark H.
Numerical Modeling and Laboratory Validation of Geosynthetic Stabilized Structures

Use of an Innovative Technology for Measuring Surface Roughness of Pavement

Weerasekara, Lalinda
Framework for Assessing Integrity of Natural Gas Distribution Pipes in Landslide Areas

Pulling rate effects on the pullout force of buried small diameter MDPE pipe in loose sand

Wenger, Greg
Construction of the A21 Dike at the Diavik Diamond Mine

Whadcoat, Siobhan
Assessing landslide deformation using trees in terrestrial lidar data

Wightman, Adrian
State Parameter Estimation by CPTu Interpretation for Liquefaction Susceptibility – A Comparison of Methods

Wijewickreme, Dharma
A study on the effects of slope grade on the soil-pipeline interaction loading

Observations on the effect of strain rate and loading rate on monotonic and cyclic direct simple shear response of reconstituted Fraser River silts

Wijeyakulasuriya, Vasantha
Construction of a Multi-Use Pathway on Soft Compressible Deposits– Case Study

Wilson, G. Ward
The effect of flyash addition on the consolidation properties and shear strength of oil sands fluid fine tailings

Wilson, Nick
Alternative to Soldier Pile Walls – Using Anchored HighTensile Steel Mesh for Temporary Excavation Support in an Urban Environment

Wong, C.K.
Time-dependent isotache behaviour observed in physical soil-pipe interaction model tests – its practical implications on pipeline performance evaluation

Unconfined compression strength as consistency index for compacted clay in construction – a statistical approach

Wong, R.C.K.
Time-dependent isotache behaviour observed in physical soil-pipe interaction model tests – its practical implications on pipeline performance evaluation

Unconfined compression strength as consistency index for compacted clay in construction – a statistical approach

Woo, Sang Inn
Distorted Bounding Surface of Clay with Consideration of the Effect of Temperature on Shearing Response

Woods, Adam
Benefits and challenges of applying GB-InSAR for use in civil projects in Canada, and ways forward

Workman, W. Chris
Geotechnical instrumentation of a tangent cast-in-place pile wall in Peace River, Alberta

Wu, Shihong
Challenges in Assessing a Hydraulic Fill Dam Built in the 1920s for Liquefaction and Piping Potential

Wu, Zhongyang
Reliability-based design cost optimization of laterally loaded drilled shafts considering spatial variability of clays

Xiao, Yingjian
Geomechanics Study of Ore and Host Rocks for Narrow Vein Mining

Top

Investigation of Drilling Performance in Core Bit Drilling using passive-Vibration Assisted Rotary Drilling (p-VARD) Technology

Investigation of Hole Widening Drilling Using Cutting Analysis

Subsurface rock interface imaging with the application of Ground Penetrating Radar (GPR)

Yacoub, Thamer
A more accurate way to measure spatial correlation length from CPT data – ARMA models

Top

Effect of Imperfect Direct Simple Shear Test Boundary Conditions on Calibration of Constitutive Models

Yanamandra, Geeshpati
Influence of tension cracks on the stability of unsupported vertical trenches in vadose zone

Yang, Xiuhan
A case study analysis of a landslide considering the residual shear strength of unsaturated soil

Yesnik, Chelsey
A Low-Cost Automated SWCC Device and Data Analysis Procedure For Unsaturated Soils Exhibiting Volume Change

Yniesta, Samuel
Evaluation of existing constitutive models in nonlinear 1D effective stress ground response analysis

On the seismic response of tailings dikes constructed with the upstream and center-line methods

Recent Advanced Constitutive Models for Liquefaction and Cyclic Softening Analysis

Yune, Chan-Young
Distorted Bounding Surface of Clay with Consideration of the Effect of Temperature on Shearing Response

Zafarani, A.
On the seismic response of tailings dikes constructed with the upstream and center-line methods

Top

Zahran, Khaled
Comparison of the Shear Strength Parameters of TDA

Zarrabi, Mohammad
Recent Advanced Constitutive Models for Liquefaction and Cyclic Softening Analysis

Zellman, Mark
Large Scale Flood, Steep Creek, and Landslide-Dam Flood Risk Prioritization in British Columbia, Canada

Zergoun, Mustapha
Post-seismic settlement mitigation for a building in Richmond, B.C.

Zhang, Zepeng
Foamed Glass Aggregate Lightweight Fill Over Compressible Soils

Ziebarth, R.A.
Statistical Analysis of the Q-system in Different Tunnelling Conditions

Zimmerman, Zoe
Ageing of a Geocomposite Drain used in landfills applications – an initial study

Zirmi, D.
Calibration of P-Y Curves Using Lateral Load Test Results in Cohesive and Cohesionless Soils for Large Diameter Drilled Shaft

Load testing of large diameter single drilled shaft foundations for the REM project in Montreal